How to remove roller brush from shark vacuum?

It’s always important to read the manual instructions for every shark vacuum model before you start the process of removing the roller brush. After some time you’ll find that your roller vacuum does not clean the floor well as it used to before. This is because the roller brush gets worn out after some time. Your shark brush is usually made of wood, plastic or in other instances metallic material.

What makes it ineffective is that it might have accumulated a lot of dust over time hence it’s always important to wash it regularly. Another issue is your brush might get worn out over time due to getting old hence it’s important to replace it with a new one after some time.

You’ll also find that some of the new models of shark vacuum clean themselves as they have this capability that has been developed over time. But it’s important to familiarize yourself on how to remove roller brush when it gets worn out.

In this article, I’m going to discuss how to remove the roller brush from shark vacuum.

  •    First, unplug shark vacuum from the power source

When you unplug the vacuum it’s important since it prevents your vacuum from getting broken in case the engine might still be running.

This is important since it ensures that you aren’t electrocuted.  You’ll find that switching off the power on the socket is not enough to mean that you’re safe. You have to unplug the power it from the switch so that you ensure there is no current flowing at all as this can lead to death in some worst scenarios.

  •    Search for the roller brush

Different shark vacuum models have their roller brush located in different locations.  Mostly it’s usually located on the underside of the shark vacuum. By placing it upside down your shark vacuum machine you’re in a position to see the roller brush location.

  •    Remove the screws from your vacuum

When you locate roller brush, you’ll now have to remove the screws so that you can remove it. This is made possible by the fact that every model comes with a set of screws that can be used to unscrew it. Hence all you have to do is locate the fitting screw and use it to unscrew.

It’s always important to place the screws in a safe place so that you don’t lose them.

  •    You have to detach roller brush from the shark vacuum

After you have removed the screw you’ll finally remove the roller brush from the vacuum. You’ll pull one end of the roller as the other end slides as you remove it.

It’s always important to rotate your roller brush in clockwise direction whenever you find that your roller is stuck with other components so that you loosen.


It’s always important to remove the roller brush from your shark vacuum with a lot of care. You should ensure that you ensure that you’re in a position to reassemble back all the parts after you remove them. If you find it quite challenging it’s always important to consult a qualified professional when it comes to this.

How to Empty Shark Vacuum?

A shark vacuum has a plastic dust bin where it stores dirt and rubbles.  You’ll have to empty it regularly so that it doesn’t lose its suction power. It’s very disappointing when you find that your shark vacuum is not working properly. This can be as a result of a buildup of dirt and debris in it.

It’s always important to empty the dirt when it reaches the mark indicated on the shark vacuum as the maximum level it can withhold.  What makes this important is that it will be able to improve its suction power once the dirt has been emptied.

Sometimes you can even empty it when it’s even halfway to increase its performance. You’ll find that there are times when the shark vacuum produces a bad smell and you have to empty it immediately. It’s always good to wash the dust cap as well as the filters in such a scenario to remove the bad smell from it.

The general process of how to empty shark vacuum is as follows:

  •    First, you’ll have to unplug the shark vacuum from the power supply. This is important to avoid situations whereby it might blow dust into you making you look dirty or in other situations get eye problems.•    You’ll then hold its handle at its top as you try to empty the dirt in your shark vacuum. •    Then, you’ll then press the button on its handle so that it can open and remove the dust cup.•    You’ll then go over to trash can where you’ll hold it over the trash can as you prepare yourself to empty it.•    At the bottom, there is a release button. You’ll then press this button which will make it open on the lower side hence releasing dirt inside into the trash can. You’ll then place back dust cup to its position.

Now let’s take a look on how to empty some of the shark vacuum models:

Ø    Shark navigator lift vacuum

When you want to empty it you’ll first have to slide release tabs on the dust cup so that you separate the dust cup. After that, you’ll hold it over the trash can. You’ll then press the release button at the bottom so that you empty the dirt and debris in it.You can even open the top and turn it upside down to make sure all the debris and dirt have been removed.

Ø    Shark Rotator vacuum

In this type of model, you’ll first have to unplug it from the power source. After this, you’ll separate dust cup from the hand vac. You’ll then place dirt cup over the dust bin after which you’ll press the release button to empty dirt and debris. After that, place back the dirt cup.

Ø    Shark rotator vacuum

In this type of shark vacuum, we’ll first separate dust cup from the main body. This is followed by holding the dirt cup over trash can whereby you’ll press the release button to empty its content. You can even turn it upside down before taking it back to its position after closing it properly.


It’s always important to empty your shark vacuum so that you enhance its suction power. This will make you clean your floor with a lot of ease due to high suction power of the machine.

How to clean shark vacuum hose?

There is a need for regular cleaning of different appliances to enable them to operate all times efficiently. Cleaning our houses can turn to be hectic at times moreso when cleaning end corners that can’t be easily reached. This is the reason vacuum cleaners are equipped with hoses to enable homeowners to carry out cleaning chores to places that are hardly reached.

Throughout the cleaning process, it’s inevitable for the wands and hoses to get dirty. The hoses are also susceptible to clogging in case they are used to vacuum large clumps from hardly reached places due to their flexible design. Since these machines rely on air movement, unclean or clogged hoses can significantly impair their entire performance.

To ensure maximum performance, there is a need for regular cleanup of hoses both outside and inside. Herein you will learn some steps on how to clean your vacuum hose to make it work efficiently for an extended period. Begin by clearing out the hose clog You should start by detaching the vacuum hose and lay it right straight at the linoleum floor or at the tiles. Follow by inserting at one end of the hose a broom handle and get it to reach through the whole hose length. All debris like for instance the socks, furniture pieces of stuff and paper wads collected in the hose should be forced out of the hose.

Next is washing the hose. In a sink, make it trap some hot water inches for this job. Follow by adding two a bleach two tablespoonful and either dish soap or squirt. The vacuum hose should be submerged into this solution. The next thing is swirling it around to enable proper water movement into the inner portion of the vacuum hose. Complete this step by rubbing the outside part of the hose with a clean cleaning cloth. Thoroughly rinse the inner part of the vacuum hose.

Right from the tap, pour water directly into the vacuum hose. To allow water to flush through the entire hose length, lift it from one end and let it get out through the other end. Inspect the inner part of the hose.  Using accordion segments strengthen your vacuum hose as you push it through and get to look through the vacuum hose. Scrub anything remaining in the vacuum hose using a bottle washer.  Complete the process by thoroughly drying it up before using.

To ensure the hose gets dry, hand it over a shower curtain rod and let it stay there for quite some hours to allow the inner folds to dry up thoroughly. To ensure it has fully dried up, visually inspect the inside once you are kind sure it has dried up. To ensure your vacuum hose serves you with its essential purpose for an extended period, ensure you take great care of it. This is a guide for your vacuum to work efficiently for an extended period. There is no time you will regret buying the vacuum since it will work best all times.